Olarm Max Dual Sim 4G + WI-FI

Olarm MAX is a multi-channel 0G, dual SIM 4G / 2G and WiFi communicator. It enables the monitoring and control of a wide range of security peripherals, enabling users to effectively manage systems, such as alarm panels and electric fences

Description

Olarm MAX

The most connected communicator yet with WiFi, dual SIM 4G / 2G, and now with 0G.

Your Ultimate Solution for Managing Systems

Olarm MAX empowers you to monitor and manage a broad spectrum of security peripherals conveniently from your phone with the Olarm APP.

Olarm MAX is a multi-channel 0G, dual SIM 4G / 2G and WiFi communicator. It enables the monitoring and control of a wide range of security peripherals, enabling users to effectively manage systems, such as alarm panels and electric fences

Features:

Supported Alarm Panels: Paradox, IDS X-Series & 806, Texecom Elite
Area & Zone Label Sync: Yes
Multi-Area Control: Yes
Arm / Set: Yes
Disarm / Unset: Yes
Stay Arm: Yes
Part Arm: Yes
Zone Status: Yes
Bypass Zone / Omit: Yes
AC Status: Yes
Panel Outputs / PGM: Yes
Remote Programming: Yes
Time Sync: Yes

Subscription Details:

Olarm PRO communicator & Olarm APP requires an active subscription. (Subscription prices as of October 2023, including VAT):

6 Months subscription: R399

12 Months subscription: R749 (you save R49)

24 Months subscription: R1,249 (you save R347)

36 Months subscription: R1,849 (you save R545)

 

Specifications

Peripheral Connection

Protocols: Serial & Keybus (depending on peripheral make & model)
Standard Cable Length: 1.5m
Maximum Cable Length: 3m
Connectors: 1 x 4 pin white Molex connector, 1 x 5 pin white Molex connector

Signals

Contact ID: Yes
Remote Connect Serial Bridge: Using Olarm Remote Connect for remote management

Software (Supported)

Babyware
Wintex
IDSwift

Mechanical Specifications

Packaged Weight: 195 g
Packaged Dimensions: 205 x 52 x 46 mm
Device Weight: 111 g
Cable Weight: 40 g
Device Dimensions: 200 x 50 x 20 mm
Enclosure Material: ABS – Resin MG47F
Status Indicator: RGB LED

Tamper Detection & Prevention

Enclosure: Tamper resistant design
Wall Mount: Includes tamper breakaway tab
Antennas: Tamper-proof internal antennas for 4G, and Wi-Fi
Tamper Detection: Optical sensor with alerts via Olarm APP and Contact ID

Power Supply

Voltage: 7 to 24VDC
Current: 100 mA (typical), 250 mA (max) @ 12 VDC
Supply Source: Typically supplied from the alarm panel / electric fence energizer via provided cable (ensure at least 300mA)

Internal Battery

Battery: 3.7V LiPo 1300mAh – 703845 or smaller
Connector: JST2
Battery Holder Dimensions: 8 x 38 x 45 mm
Note: Battery not included, sold separately

Operating Conditions

Temperature: –15 to 60°C
Humidity: 0 – 90% RH

Radio / Wireless Technologies

Connectivity: 4G, 2G & Wi-Fi (simultaneous multi-path routing)
Mobile Connectivity: 4G & 2G with tamper-proof internal & optional external antennas (SMA connectors)
Mobile Network Switching: Typically under 60 seconds (coverage & network dependent)

Regional Models

Olarm MAX A: South Africa, Africa & Europe
LTE-FDD Frequency Bands: B1/3/5/7/8/20/28
GSM Frequency Bands: B3/8

SIM Cards

South Africa: 2 x Olarm managed local SIM cards – Vodacom & MTN

Wi-Fi – 2.4GHz

Standards: IEEE 802.11b/g/n
Center Frequency Range: 2412 ~ 2484 MHz
Antenna Type: Tamper-proof internal

Data Rate

20MHz: 11b: 1, 2, 5.5, 11 Mbps; 11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; 11n: MCS0-7, 72.2 Mbps (Max)
40MHz: 11n: MCS0-7, 150 Mbps (Max)

Tx Power: 13 to 19.5 dB (Data rate dependent)
Rx Sensitivity: -69 to -97 dBm (Data rate dependent)
Encryption: WPA2-PSK
WPS Setup: Yes

Configuration

Setup: Plug-and-play zero configuration via device QR Code scan within Olarm APP
Olarm APP Users: Unlimited (requires active subscription)

Compatible Alarm Panels

Paradox

MG5050 (minimum panel firmware v1.11.001)
MG5050+ (minimum panel firmware v1.11.001)
SP6000 (minimum panel firmware v1.10.004)
SP6000+ (minimum panel firmware v1.10.004)
SP65
EVO192

Texecom

Elite 24
Elite 48 (coming soon)
Elite 64
Elite 64-W
Elite 64-W LIVE
Elite 88
Elite 168
Elite 640 (coming soon)

IDS

806 (requires adapter board – sold separately)
X16 (requires adapter board – sold separately)
X64 (requires adapter board – sold separately)
X64 Serial (requires adapter board – sold separately)

Orisec

ZP-20 (coming soon)
ZP-40 (coming soon)
ZP-100 (coming soon)

Honeywell

Galaxy G2 (coming soon)

Pyronix

(coming soon)

Package Contents:

1x Olarm MAX
1x Tamper-proof wall mount Mounting hardware
1x Reversible 1.5m peripheral cable